Set of two adjustable steering rod turnbuckle, manufactured from world-renowned top-secret "Hudy Spring Steel". 

Molded 4.9mm ball joints, open on both sides, for connection to 4.9mm pivot ball. Set of six. 

This set is used to relocate the inner mounting points for the rear camber links. Used with #303093 rear shocktower to utilize shorter camber links with short arm suspension, and also allows changes to rear roll center. Set includes alu pivot ball posts and mounting hardware. 

Optional belt tensioner. 

CNC-machined top-quality graphite rear shock tower for the T1M Mini offers numerous shock upper mounting positions, as well as numerous mounting positions for rear C-hub upper suspension links. 

Molded 4.9mm ball joints, special construction. For connection to 4.9mm ball end. Set of four. 

Ball end manufactured from world-renowned top-secret "Hudy Spring Steel" to which rear upper camber links attach. Can be adjusted into and out of rear bulkheads to compensate for wheelbase changes. Set of two. 

Molded rear upright for C-hub suspension. Can be used on either left or right side. 

CNC-machined rear upright made from highest-quality duraluminum features an integrated 1° outboard toe-in. Use the outboard toe-in will increase the corner speed. Complete set of left and right blocks. Includes composite bushings for ball-bearings. 

CNC-machined rear upright made from highest-quality duraluminum features an integrated 2° outboard toe-in. Use the outboard toe-in will increase the corner speed. Complete set of left and right blocks. Includes composite bushings for ball-bearings. 

Hudy Spring Steel drive shaft coupling, works in front and rear drive shafts. Specially hand-ground for maximum precision. Set of two. 

Low friction drive pin clips for protection and cushioning of drive shaft pin in diff outdrives. Set of four.

V2 Update: Both the material and design have been improved to reduce wear of the differential outdrives. 

CNC-machined hard coated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures ‶slop-free" wheel rotation. Set of two. 

CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures ‶slop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.  

CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures ‶slop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a -1mm offset which means that they are 1mm shorter than standard wheel axles.  

CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures ‶slop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a +1mm offset which means that they are 1mm longer than standard wheel axles.  

CNC-machined drive shafts from world-renowned top-secret "Hudy Spring Steel". These race-quality drive shafts are the smallest in the world, exclusively manufactured by HUDY. Set of 2. 

Rear lower (outer) spring steel pivot pins for C-hub suspension. Hardened for very high durability and long life. Set of two. 

Specially-machined 5.0mm pivot ball with double bevel shoulders, for use with open 5.0mm ball joints. Set of 10 pieces. 

New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain. These highest quality ball-bearings are fitted with special polyamid blue covers, and are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.  

Hex screw M3x6. Set of 10 pieces. 

Hex screw M3x10. Set of 10 pieces. 

Hex setscrews M3x4. Set of 10 pieces. 

Hex setscrews M3x5. Set of 10 pieces. 

O-clip 10. Set of 10 pieces. 

Pin 2x10. Set of 10 pieces. 

M3x4 setscrew, hex drive. Set of 10 pieces. 

M3x5 setscrew, hex drive. Set of 10 pieces. 

M3x6 button-head machine screw, hex drive. Set of 10 pieces. 

M3x10 button-head machine screw, hex drive. Set of 10 pieces. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4. Set of 2 pieces. 

10mm dia. O-clip. Set of 10 pieces. 

Polished chrome pin. Dia. x length = 2mm x 10mm. Set of 10 pieces.